Baintech 12V 110Ah Slimline 20A Lithium Battery WITH INBUILT DC-DC charger just weighs 11kg, the unique SUPER slimline shape makes it the perfect battery for installations where space is a premium. Slide it behind a seat, under a false floor, or in a rear wing.
Baintech 12V 110Ah Slimline 20A DC-DC Lithium Battery is measuring just 635mm x 260mm x 50mm
- Internal 100A BMS
- Strong aluminum enclosure
- Slimline shape and size
- Parallel connect capable
- Internal 20A DC-DC Charger & VSR
- 1 x grey Anderson connector (In/Out)
- 1 x blue Anderson connector (DC In)
The Baintech 12V 110Ah Slimline 20A DC-DC Lithium Battery model contains one (1) grey Anderson plug connector and one (1) blue Anderson plug connector, accessible from the side of the battery. The grey connector can be used as input and output for charging and running loads.
Charge sources to the grey Anderson connector could include:
– External AC charger; or
– External (regulated) solar charger.
The blue connector is reserved for a DC input, to make use of the internal DC-DC charger. The DC-DC charger is rated for 20A input from a vehicle alternator or start battery.
The internal 20A DC-DC charger contains a Voltage Sensing Relay (VSR). As shown in Figure 5 the VSR has an LED status light and adjustment trim pot, which can be used to adjust at what input voltage (from the vehicle alternator / start battery) the DC-DC charger turns on and off. There is a dead-band of 0.5V so that it typically turns on at 13.3V and turns off at 12.8V.
NOTE – There are no internal fuses inside the Baintech 12V 110Ah Slimline 20A DC-DC Lithium Battery so an external fuse must be used for the grey Anderson connector, 100A maximum, to ensure never to exceed the BMS 100A continuous charge and discharge rating. The cable to the blue Anderson connector should be protected by an external fuse (at least 20A, rated for the cable size), as close as possible to the vehicle battery/alternator.