Description
Raptor is super-tough, highly durable, UV-stable coating that is applied by spray gun, roller or brush, ensuring protection against scratches, abrasions, rust, corrosion, damp and extreme temperatures.
-
Can be applied with underbody schutz gun, paint roller, paint brush or spray gun – no spray booth required
-
Helps deaden sound and vibrations; waterproof seal and is UV resistant
-
Can be used as non-skid and slip-resistant coating (if anti-slip grit is added)
-
Protects against rust, corrosion, damp, and extreme temperature
-
Provides excellent UV protection
-
Resistant against fuels, hydraulic oils, animal urine, salt water and more
-
High coverage – up to 12 m² per 4 litre kit
With a wide variety of finish textures, the texture pattern can be changed by:
-
Varying the speed of spray application
and altering the distance that the gun
is held from the surface
-
The addition of suitable thinner
(up to 10%) will give a smoother finish
-
Using higher/lower spray gun pressure
-
Using paint roller or paint brush
Using appropriate surface preparation, RAPTOR will stick to:
-
Steel, aluminium and zinc-coated metals
Cured 2K paints
-
Fibreglass, plastics and vinyl (even seats – RAPTOR remains highly flexible)
-
Concrete, timber and fibro
To achieve a flat finish with reduced texture:
-
Reduce the RAPTOR 10-20% with good
quality 2 pac reducer
-
Apply with a gravity feed spray gun,
using a 1.6mm – 2mm nozzle, depending
on amount of reducer used
-
Adjust inlet pressure on the spray gun
to between 35-60 PSI
-
Hold the gun approximately 30-60
centimetres from the surface
-
Apply the RAPTOR in a sweeping motion
to obtain the desired build and texture
-
Allow each coat 60 minutes to flash off before applying the next coat
Reviews
There are no reviews yet.