TD42 PERFORMANCE weld-on top half intake manifold

Description

Another Adventure Corp innovation!

The factory Nissan td42 manifold is commonly known to reduce performance, these custom modified cast top half manifolds simply weld on to your existing factory cast manifold these top halves are the same length, width and thickness to match up and weld on.

The Adv Corp TD42 top half intake manifold has a 3″ intake port into the side of the manifold and 3x pre-tapped boost ports on the rear of the TD42 manifold. These ports are tapped at 1/8 bsp, which is the most common size generally used in boost referencing.
If you have 2″ or 2.5″ intercooler piping, its just a simple task of buying silicone joiners that reduce in size to make this work, this means these manifolds are ready to flow over 300hp!

The Adventure Corp TD42 intake manifold tops are cast from high quality aluminum and weld very nicely. These are supply as the top half only, these tops require cutting and welding of the factory TD42 manifold.

If you don’t have someone local to complete the task you can ship us your factory TD42 manifold and we can fit these and ship it back to you completed and pressure tested. (allow 1.5-2 weeks turn around and approx $300 to cut and weld)

Need your TD42 tuned? click here to read about tuning

Need more TD42 power up options? click here to read about power ups

200Hp TD42 video: https://www.youtube.com/watch?v=jTjj-uS9dc0

Note:
-We strongly recommend the welding is undertaken by an experienced alloy welder, no responsibility will be taken for damage or cracking caused by a flawed welding process.
– You are just buying the TOP HALF to weld on to YOUR existing manifold.